Likewise, from the linear part of the curve obtained from experimental data registered at high loading forces, the kB of the bacteria could be calculated by linear fitting (buy LY3023414 magenta lines in Figures 5B-C) [59]. Elasticity values obtained were 0.15 ± 0.08 MPa for MB and 0.38 ± 0.11 MPa for MH2. As expected, Young’s modulus data resulted to be in very good agreement with those previously obtained by PF-QNM (Table 3). On the other hand, kB values, which ranged from 0.022 N/m to 0.050 N/m, are consistent

with those obtained for other gram negative bacteria as thoroughly reported [59, 61]. Moreover, these figures exhibited the same trend showed by elastic modulus when altering selleck products the culture medium. Conclusions The influence of the culture medium and the incubation temperature on the total cell density and biofilm formation of Shewanella algae CECT 5071 has been studied. The influence of both factors was found to be highly significant. Additionally, the culture medium and the inoculum size exerted a significant influence on the values obtained for the IC50 of three antifouling biocides. An approach to the unification of Thiazovivin nmr criteria in antifouling bioassays involving marine bacteria could be the adaptation of already

existing, universally-accepted methodologies to the requirements of test organisms concerning marine biofouling. With regard to bacteria, CLSI guidelines constitute the most evident and clear reference. With this work we have established and characterised in detail a biofilm model for antifouling bioassays. Using S. algae CECT 5071 as model organism, we were able to demonstrate

quantitatively the influence that the culture medium exerts not only on the biofilm density or thickness, but more importantly, on the biofilm structure and on its nanomechanical and physicochemical properties. CLSM showed two clear architectural patterns in function of the medium in which the biofilms Adenosine triphosphate were developed. From PF-QNM and FD-AFM data it is possible to infer that S. algae cells grown in MH2 medium exhibited a more complex outer surface, remarkably stiffer and with a significant higher range of Young’s modulus figures distribution, when compared to the other media which showed more similar features in this sense. On the other hand, adhesion forces results evolved in the opposite way thus confirming the differential physicochemical behaviour exhibited by the biofilms in function of the nutrient environment. Methods Strains and assay platform Shewanella algae CECT 5071 was acquired from the Spanish Type Culture Collection (CECT). The strain was cryopreserved at −80°C. Before each experiment, an agar plate was streaked and incubated for 24 h. A single, isolated colony was selected to streak a second agar plate that was incubated for other 24 h. Inocula were prepared from these second agar plates. The experiments were conducted in 96-well flat-bottom surface-treated polystyrene microtiter plates (Nunc 167008).