Conclusion Highly ordered ZTO nanowires with heavy tin doping (approximately 1/3) embedded in the AAO membrane have been successfully fabricated by an electrodeposition and heat treatment method. The pure metal Zn and Sn were electrodeposited into the AAO membrane, which is selleck products measured to be 60 nm. ZTO nanowires can be synthesized by oxidizing the Zn-Sn alloy nanowires in the furnace at 700°C for 10 h. FE-SEM micrographs show that ZTO nanowires are dense, have uniform diameter, and are arranged parallel to each other. XRD analysis indicates that the ZTO nanowires

have a hexagonal structure. The obtained ZTO nanowires with a XL184 in vitro Zn/(Zn + Sn) atomic ratio of 0.67 (approximately 2/3) were nearly the same as the Zn/(Zn + Sn) molar ratio of the starting solution (2:3). It can be said that the composition of ZTO nanowires can be strongly controlled by adjusting the Zn/Sn molar ratio in the starting solution through co-electrodeposition. The analysis of the HR-TEM/SAED results reveals the that ZTO nanowire

is single-crystalline. The band gap of ZTO nanowires (3.7 eV) shows a direct transition www.selleckchem.com/products/jq-ez-05-jqez5.html and exhibits a linear relationship at 4.0 to 4.5 eV. Authors’ information J-BS is a professor in the Department of Electronic Engineering at Feng Chia University. P-FW, H-SL, Y-TL, and H-WL are PhD students of the Department of Electrical and Communications Engineering at Feng Chia University. C-TK is a professor in the Department of Dentistry at Chung Shan Medical University. W-HL is a master student in Institute of Oral Sciences at Chung Shan Medical University. S-LY is a professor in the Department of Electronic Engineering at Hsiuping University of Science and Technology. Acknowledgements The research was supported by the National Science Council of R.O.C. under grant no. NSC 98-2122-M-035-003 MY3. The research was also supported by the Chung Shan Medical University under grant nos. FCU/CSMU-101-1 and TCVGH-FCU1038203 and the Precision Instrument Support Center of Feng Chia University. References 1. Lin Y-T, Shi J-B, Chen Y-C, Chen C-J, Wu P-F: Synthesis and characterization of

tin disulfide (SnS 2 ) nanowires. Nanoscale Res Lett 2009, 4:694–698.CrossRef 2. Chen Dichloromethane dehalogenase YC, Shi J-B, Wu C, Chen C-J, Lin Y-T, Wu P-F: Fabrication and optical properties of CuS nanowires by sulfuring method. Materials Lett 2008, 62:1421–1423.CrossRef 3. Shi J-B, Chen Y-J, Lin Y-T, Wu C, Chen C-J, Lin J-Y: Synthesis and characteristics of Fe nanowires. Jpn J Appl Phys 2006, 45:9075–9077.CrossRef 4. Coutts TJ, Young DL, Li X, Mulligan WP, Wu X: Search for improved transparent conducting oxides: a fundamental investigation of CdO, Cd 2 SnO 4 , and Zn 2 SnO 4 . J Vac Sci Technol 2000, A 18:2646–2660.CrossRef 5. Mary Jaculine M, Justin Raj C, Jerome Das S: Hydrothermal synthesis of highly crystalline Zn 2 SnO 4 nanoflowers and their optical properties. J Alloys Compd 2007, 577:131–137.CrossRef 6. Ginley DS, Bright C: Transparent conducting oxides. MRS Bull 2000, 25:15–18.CrossRef 7.